Baselit operation manual

  1. On and off (make sure the battery is not dead)
  • Wake up lightsaber: Hold button for 4 seconds.
  • Switch on: push button.
  • Power off: press and hold the button for 4 seconds.
  • Deep sleep mode: press and hold the button for 8 seconds.


2. Light Effects ( Lightsaber must be on)

  • "Blaster" effect: press the button.
  • "Lock-Up" effect: hold the button down for 2 seconds, then press the button.
  • Change color: press and hold button for 3 seconds, then press button.


3. Sound Effects (Lightsaber must be off)

  • Change soundfonts: press and hold the button for 2 seconds.
  • Adjust volume: press and hold the button for 1 second.


Troubleshooting FAQ

  1. Lightsaber has no sound

Please confirm it is not in silent mode.
You can adjust the volume as described above.

2. The blade is too loose

Make sure the screws holding the blade are tight.


Video demonstration:


Please contact if you have any questions.